Davis Construction Inventory Reduction

If you purchase a crane or other equipment that requires disassembly for transport, please schedule a separate appointment. To make arrangements, contact Neil Sheridan at 517-749-7616.

All disassembly is the responsibility of the buyer. The seller has agreed to assist with loading but does not have staff available to dismantle equipment.

Lots 1 & 1A are linked together with the same end time and auto-extend. They will not close until there has been no bids on either of these lots for a full five minutes.

Certified March of 2025

S/N: 555-1056

Boom tip 

Boom butt

140ft total boom

Rooster sheave

If you purchase a crane or other equipment that requires disassembly for transport, please schedule a separate appointment. To make arrangements, contact Neil Sheridan at 517-749-7616.

All disassembly is the responsibility of the buyer. The seller has agreed to assist with loading but does not have staff available to dismantle equipment.

Lots 1 & 1A are linked together with the same end time and auto-extend. They will not close until there has been no bids on either of these lots for a full five minutes.

S/N 555-1044

Was used as a parts but does run 

120ft of total boom 1 40ft section is bent and out of service 

If you purchase a crane or other equipment that requires disassembly for transport, please schedule a separate appointment. To make arrangements, contact Neil Sheridan at 517-749-7616.

All disassembly is the responsibility of the buyer. The seller has agreed to assist with loading but does not have staff available to dismantle equipment.

waiting for the part to repair the crane, update, crane has been repaired 10-16-25.

Working condition 

Purchased in: Approx July 1995

Boom tip

Boom Butt

10ft section

2 20ft sections

40ft section

If you purchase a crane or other equipment that requires disassembly for transport, please schedule a separate appointment. To make arrangements, contact Neil Sheridan at 517-749-7616.

All disassembly is the responsibility of the buyer. The seller has agreed to assist with loading but does not have staff available to dismantle equipment.

Boom tip Boom butt

30ft section

2 20ft sections

30ft section

If you purchase a crane or other equipment that requires disassembly for transport, please schedule a separate appointment. To make arrangements, contact Neil Sheridan at 517-749-7616.

All disassembly is the responsibility of the buyer. The seller has agreed to assist with loading but does not have staff available to dismantle equipment.

Purchased in: Approx June 2010

SN 18HA542

Cummins diesel with twin disc torque converter

Boom tip

Boom butt

10ft section

20ft section 

30ft section

If you purchase a crane or other equipment that requires disassembly for transport, please schedule a separate appointment. To make arrangements, contact Neil Sheridan at 517-749-7616.

All disassembly is the responsibility of the buyer. The seller has agreed to assist with loading but does not have staff available to dismantle equipment.

Purchased in: Approx July 1996

Hours at Purchase:  4543

Miles at Purchase:  3,152

Approx Current:  6,529

Boom tip

Boom butt

2 10ft sections

2 40ft sections

If you purchase a crane or other equipment that requires disassembly for transport, please schedule a separate appointment. To make arrangements, contact Neil Sheridan at 517-749-7616.

All disassembly is the responsibility of the buyer. The seller has agreed to assist with loading but does not have staff available to dismantle equipment.

Purchased in: Approx September 2003

Boom tip

Boom butt

(4) 10ft sections

(2) 20ft sections

40ft section

If you purchase a crane or other equipment that requires disassembly for transport, please schedule a separate appointment. To make arrangements, contact Neil Sheridan at 517-749-7616.

All disassembly is the responsibility of the buyer. The seller has agreed to assist with loading but does not have staff available to dismantle equipment.

SN 58B3925

Boom tip 

Boom butt

20ft section

40ft section

If you purchase a crane or other equipment that requires disassembly for transport, please schedule a separate appointment. To make arrangements, contact Neil Sheridan at 517-749-7616.

All disassembly is the responsibility of the buyer. The seller has agreed to assist with loading but does not have staff available to dismantle equipment.

Denim Black

After market pipes—Screaming Eagle.  Have the original parts from the first buyer.

Owner states: Rarely ridden after purchase.  A working mom with too many things to do and not enough time to go solo riding.

Bought with 2,709 miles in 2013.  Been sitting in the garage since then.

This is a titled vehicle subject to 6% sales tax, 75.00 broker fee, and 15.00 transfer fee.

This is a titled vehicle subject to 6% sales tax, 75.00 broker fee, 15.00 transfer fee

Attenuator 4x2 L6, 6.6L (403 CID); Turbo Diesel 160-170HP Manual 

Mileage: 138,671

VIN #: 1FDXK74P7MVA05614

This is a titled vehicle subject to 6% sales tax, 75.00 broker fee, 15.00 transfer fee

Attenuator 4x2 L6, 7.6L (466 CID) Diesel Automatic 

Mileage: 108,594 

VIN #: 1HTGBAAR0SH634802

This is a titled vehicle subject to 6% sales tax, 75.00 broker fee, 15.00 transfer fee

This is a titled vehicle subject to 6% sales tax, 75.00 broker fee, 15.00 transfer fee

Truck is still being used therefore mileage will go up.

Selling with the tank, box, and fuel pump.

This is a titled vehicle subject to 6% sales tax 75.00 broker fee, and 15.00 transfer fee

This is a titled vehicle subject to 6% sales tax, 75.00 broker fee, 15.00 transfer fee

This is a titled vehicle subject to 6% sales tax, 75.00 broker fee, 15.00 transfer fee

8ft wide, 47ft length, 30ft well

This is a titled vehicle subject to 6% sales tax, 75.00 broker fee, 15.00 transfer fee

This is a titled vehicle subject to 6% sales tax, 75.00 broker fee, 15.00 transfer fee

SN 1H9US2639XS196126

Current hour meter: 9,646

Machine is currently on a project in Kalamazoo.  Hours will change due to still in use on a project.  More pictures will be added

SN: 4SS01264

1. Davis acquired in approx. August 2010
2. Hours at sale (per original listing) 8509 hours

S/N: A85152

Hours may change due to still being used around the yard

S/N: 14HP092567

Hours may change due to still being used around the yard

S/N: 15D-10616

Hours may change due to still being used around the yard

S/N: 4SS00718

Hours will change due to being used everyday.

S/N: 160016380

Hours will change due to being used everyday.

While using this around the yard reverse gear went out on this loader and will not be fixed. 

S/N: T0310EX839115

Showing 7,074 hours Hours will change due to being used everyday

S/N: T0550GH783746

Hours may change due to being used still

S/N: 147-67156

S/N: Ys06-U0535

Has an electrical issue but does run

S/N:15K-5767 Showing 14,482 hours

Boom cylinder leaks

Showing 3537 hours S/N:10284

Broom attachment

SN 0454011

Have the extension 

Min paving width 12’ 

Max paving with curbs 30’

Machine hauling measurements are:

Height: 9'

Width: 8'2", possibly 8' depending on how it is tied down

Travel length: 20'6" with tongue folded up

Pallets:

2 EA  4' x 6' x 3' high

1 EA  4' x 4' x 22" high

1 EA  39" x 39" x 22" high

Machine Dimensions:

• Height: 9'

• Paving Width (12-24 ft plus curb molds)

• Current configuration: 17.5 ft including curb mold

📦 Included Pallets with misc. parts and attachments:

• 2 pallets – 4' x 6' x 3' high

• 1 pallet – 4' x 4' x 22" high

• 1 pallet – 39" x 39" x 22" high

🔧  Machine Details / Specs

• Make & Model of the machine ("Curb Master)

• Year of manufacture 1987

• Hours of use (hour meter not present)

• Engine type (Deutz Diesel)

• Curb molds included

• Vibration system, slipform capabilities